1. The furnace body of the annealing furnace is made of profiled steel, and the steel plate of more than 6 mm is used as the furnace surface. After welding each other, a whole body with good sealing effect and less heat loss is formed, which is used as the outer steel frame structure of the annealing furnace.
2. Full-fiber lining, through ingenious design, improves the insulation performance of 20% lining, reduces the heat storage loss of more than 60% lining, ensures that the surface temperature of the furnace body is less than 60 C, and the energy-saving effect is more prominent. The service life of the furnace is twice as long as that of the traditional annealing furnace.
3. The door and mouth of the furnace are sealed by the advanced spring-type compaction structure and soft-edge sealing device in China, which has long service life and good sealing effect, and can effectively prevent heat spillover in the furnace. The loading trolley is compact in structure, firm in assembly and flexible in entry and exit.
4. PLC regenerative combustion automatic control system control, once safety abnormalities are found, the alarm signal will be immediately activated.

Applicable fuels: gas and fuel;
Application conditions: the temperature of the annealing furnace changes according to the prescribed heating procedure with time. Depending on the technical requirements of heat treatment for different heating parts, the maximum heating temperature of the furnace is 800~1000 degrees.